The AGS-X2 comes standard with industry-leading TRAPEZIUM X-V data processing software. Offering comprehensive functions, TRAPEZIUM X-V offers an unparalleled level of operation. TRAPEZIUM LITE X, Shimadzu’s entry-level data processing software, provides enhanced productivity and efficiency for quality control operations.

Convincing Cost Performance

AGS-X2 Provides Practical, Affordable Testing Solutions

Easy Control of Stress and Strain

Offers real-time auto tuning of control parameters, based on measured test force and strain data. Safely make comparisons to unknown sample data without the need for preliminary tests.
In addition, the AUTOTUNING FUNCTION easily performs strain control, an ISO6892 requirement.

	IRON & STEEL	In addition to conventional stress control, tensile testing with strain control is increasingly in demand. ISO 6892   JIS Z2241
	PLASTICS & RESIN	Measuring the modulus of elasticity in the ultra-small strain domains proscribed by ISO and JIS standards has become a necessity.  ISO 527   ISO 178  JIS K7171
	CERAMICS	Many samples are damaged by microscopic displacements, so accurate control is needed, right from the start of testing.

Achieve an Accurate S-S Curve with High-Precision Load Cells

• The wide, guaranteed load cell precision range of 1/500 to 1/1 improves testing efficiency and ensures that virtually all of your testing can be performed without switching the load cell or jig. Furthermore, high-speed sampling of 1 msec ensures no missed strength changes.
• 

Improved Safety

SAFETY FUNCTION / ONE-TOUCH STROKE LIMIT

The safety function stops the testing machine if force changes exceed a certain level during specimen setting or return.
In addition, setting stroke limiters is easy with one touch of the switch.

PROTECTION COVER

Controls scattering of the test specimen during testing. The interlock improves safety: operators can open and close it easily with the slide mechanism.

DUAL EMERGENCY-STOP SWITCHES

Features emergency-stop switches on both sides (20 kN–300 kN frame).

Smarter Work Space

New and enhanced functions support easier, more efficient testing

• 
• i. Protection Cover to Protect Against Flying DebrisA vertically sliding safety guard is available. Opens easily with one hand. When the protection cover is open, an interlock function disables testing and return movement.ii. One-Touch Stroke LimitersPinch and slide; release to lock. One-touch stroke limiters permit simple one-touch adjustment and firm locking of the crosshead stroke limit positions.iii. Load CellFor the range of 1/500 to 1/1 of the load cell rating, a single load cell that guarantees test force accuracy to ±0.5% of the indicated value (for high-precision type) covers an extensive testing range. The load cell rated value is stored in the calibration cable and automatically recognized when the cable is connected.iv. CrossheadAchieves a 2,000 mm/min testing speed and a 2,200 mm/min return speed (20 kN frame), significantly reducing the time required to conduct repetitive testing.

v. Common Joint for Both Tensile and Compression Tests (20–300 kN frame)

Adopts a single joint for both tension and compression tests. This makes it easier to exchange jigs. In addition, the joint is set with a nut placed in the upper part of the loading cell, which allows for safe detachment of the joint on the table.

vi. Main Operation Panel

The main operation panel enables the development and storing of test conditions, allowing testing without having to connect to a PC. Perform various operations with the jog wheel, such as opening and shutting the button for the automatic extensometer. The main operational panel is movable, allowing convenient adjustment of the angle. The display language can be selected as English or Chinese.
* The controller is needed separately for the automatic opening and shutting of jigs.

vii. Emergency Stop Switches

Reliably cuts off power to the servo amplifier, instantaneously stopping crosshead movement in the event of an emergency.

Aggregation of Cutting-Edge Functions

Revolutionary Technology Provides Full Control

Ultra-high-speed 　Ultra-high-response
data sampling　　　crosshead control
10kHz　　　　×　 1kHz

Equipped with Multi Processors and Multi Engines, Providing Ultrafast Data Acquisition and High Response Control

Shimadzu’s proprietary control box is equipped with two processors and three engine units. It provides 1 kHz high response crosshead control and 10 kHz high-speed data sampling through high-level simultaneous parallel processing, based on a meticulous timing design, and the allotment of various communications, measurement, and control functions across multiple devices.

Leave Strain Rate Control to the Machine by Utilizing New Autotuning

High-accuracy control is maintained under noisy, highly disturbed conditions, something that was hard to provide with conventional autotuning.
This high-level autotuning is achieved by using not only feedback measurement values but all measurement values in the calculations for real-time updates of the control model.

［Steel and Nonferrous Metal Testing］

Strain rate control, in which the rate of deformation measured by an extensometer is controlled to be constant, requires highly accurate control to follow rapid changes in material behavior.
Metal Tensile Test Standard: ISO 6892(JIS Z 2241) specifies that the allowable range of increase in strain to the yield point is ± 20% or less. The strain rate control specified in ISO 6892(JIS Z 2241) is possible*1 to achieve with the AGX-V2 for many materials.

［Practical Simulation Testing］

To maintain engine mounts and other rubber materials at a constant test force, it is necessary to gradually change the retention position to suit the characteristics of the test sample. In order to maintain the test force at a constant value, high control stability is required, with high control responsiveness and no vibrations generated due to excessive response.*2

［Free Running Compression Testing］

Stable control is achieved even in free running compression tests. In these tests, the compression indenter or bending punch is allowed to run free until it makes contact with the sample, at which point the load is increased up to a set test force.
The overshoot of the target value is reduced, even in free running compression tests of highly rigid materials, resulting in high-accuracy test force retention.*2

*1 The graph is an example. The control accuracy may vary depen ding on the material properties and the surrounding environment . It does not guarantee accuracy.
*2 The graph is an example. The state of control can vary depen ding on the material properties and the surrounding environment .

Wider Range, More Detail, More Variety

Ultra-high-speed data sampling
10kHz

Captures Instantaneous Changes

The ultra-high-speed sampling function has progressed up to a sampling rate of 10 kHz (0.1ms). Sudden and tiny changes, such as when brittle materials break, can now be assessed.

Guaranteed test force range
1/2000

Reduces the Frequency of Load Cell Replacement

The guaranteed test force accuracy range has been enlarged to 1/2000 for an even wider range of data reliability. Even data from the very beginning of the test force application can be analyzed with confidence. Tests that previously required multiple load cell replacements to suit the test force are now supported by a single load cell, cutting back on replacement procedures and calibration expenses.

Maximum number of sensor inputs
20ch

All the Data Are Synchronized and Acquired with High Accuracy A Data Logger is Not Required

The external input ports can be expanded to 20 channels. Analog input units and counter units can be selected, making it easy to acquire more data without a data logger. The load cell, extensometer, and external input ports are synchronized, and all channels are sampled simultaneously, improving the simultaneity of the data. This further improves the accuracy and reliability of the elastic modulus and other data calculated using two or more measurement values

Testing Machine Main Unit
Load Frame

Frame Design Provides High Rigidity and High-Level Alignment

The newly designed guide column^*1 is equipped with a support ring^*1 that maintains a right angle with the table surface. As a result, measurement repeatability has been improved in tests of highly rigid materials and highly brittle materials, prone to the impact of frame rigidity or alignment, enabling stable testing.

Voice Operation Device
XV-Talk

New Operability with Voice

The AGX-V2 responds to the operator’s voice.
The AGX-V2 operates in response to key phrases spoken by the operator. This frees the operator from frequently used buttons, such as “Start Test” and “Return.”*2*3

*1 Available floor models range from 20 kN to 300 kN.
*2 Use the voice operation function when the noise is 55 dB(A) or less. Voice operations may not work when the background noise is high.
*3 Without a safety cover, some voice control functions are limited.

True Safety for both the Operator and the Machine

Safety Cover

Protects Operators from Debris

Highly transparent, impact-resistant polycarbonate safety covers are provided as standard for the front and rear of the test space. This prevents samples from flying out when they break. An interlock function is provided, so that if the safety cover is not closed, testing and the return operation are prevented, reducing the risk of accidents.
• Using optional accessories, all movement including the jog operation can be prohibited.

Intelligent Crosshead

Prevents Jig Impacts

The intelligent crosshead always recognizes its current position. If the jigs get too close due to an operational error, an impact warning is issued, and the crosshead is stopped automatically.

Contact Detection and Instantaneous Emergency Stop

The machine status is diligently monitored even when the crosshead is moved with the safety cover open, such as when adjusting the position of test jigs or attaching samples. If the machine detects the test force changes due to contact with jigs or hands, the crosshead performs an emergency stop.

Overload Detection Function

If the machine detects a test force exceeding the load cell capacity, the crosshead stops automatically. This reduces the risk of load cell damage from overloads during the jog operation and during testing. (Note that the possibility of damage cannot be completely eliminated.)

Stroke Limit Switch

Pinch, Position, and Release Grips

A stroke limit switch, which sets the limits of crosshead movement, prevents crosshead and jig impacts. A spring mechanism within the switch reliably sets the position when the hand is released, preventing configuration errors due to procedural mistakes such as insufficient tightening.

Self Check Function

Machine’s Self-Diagnostic Function

The function constantly monitors sensor amplifler calibration information, the operational status of the testing machine, the power supply voltage, and the communications status. The user is immediately notifled when a problem occurs. Additionally, the usage time and number of uses of the machine are checked, and a notification is issued when prescribed values are reached. This assists with the assessment of maintenance periods and helps reduce downtime. (It does not detect offsets in measurement values from load cells and extensometers due to age-related changes. Periodic maintenance and inspections by a field engineer are recommended.)

Operability that Takes the Shortest Path to Results

All Jigs are Easily Connected

The multi joint, which connects jigs to load cells, enables all jigs, including tensile, compression, and bending jigs, to be connected easily. The replacement of heavy joints is no longer needed, which simplifies the replacement of test jigs. A small-capacity load cell can be connected to the tip, so tests with small-capacity load cells can be performed with a large-capacity load cell attached as is.

Smart Controller

The controller is equipped with a touch panel LCD, which displays the optimal buttons and information for the situation. It shows a variety of operations and informational displays, including jig space adjustments prior to testing and confirmation of measurement values during tests. A universal interface standardized with the software has been adopted to support all kinds of testing by high operability and visibility.

Selection of operation sound according to environment

The special AUTOGRAPH operational sounds are adjustable. Select from a pleasant sound quality enhancing operational comfort or a sound that is easy to hear even in noisy conditions. (The sound can also be turned OFF.)

Voice alerts

A voice message warns the operator before the crosshead moves, preventing mistakes by the operator. (The sound can also be turned OFF.)

Finish Settings and Operations with a Hand-Held Controller

Configure Optimal Grip Space
Automatically

With the intelligent crosshead function, the crosshead moves to ensure a user-defined jig separation. The jig separation is constantly monitored to prevent impacts between jigs. (The jigs must be pre-registered.) Additionally, the jig separation movement can be performed automatically in accordance with the test conditions by interlinking it with TRAPEZIUMX-V.

Perform the Opening/Closing of
Grips from a Single Controller

Using a hand-held controller, both pneumatic and hydraulic type grips can be opened and closed automatically. This controller improves productivity since everything needed to prepare for measurements, from crosshead movement and testing conditions settings to hydraulic adjustments, can generally be implemented.

Check Detailed Settings with
a Hand-Held Controller

The user can check the overview of the test conditions, set the sound, configure power saving settings, and set the system language. In addition to improving operational efficiency, pop-ups that check operations prior to movement reduce the risk of operational mistakes.

Shimadzu Corporation started manufacturing testing machines more than 100 years ago. We have always advanced and grown together with our customers.
We created the new AUTOGRAPH from the desire that all those performing tests can perform their work in a safer, more efficient manner.
The AUTOGRAPH AGS-V is always on the side of our customers.

Operator-Friendly Design with Enhanced Safety

Protection Cover

• Protects Operators from DebrisThe protection cover is provided as standard on the front of the test space. Manufactured from high-durability polycarbonate, it blocks ruptured sample fragments and protects operators.Unintended Operation Prevented with an InterlockWith the interlock function, test and return operations cannot be performed if the protection cover is open, reducing the risk of accidents.Raising/Lowering Cover with Free Stop FunctionThe raising/lowering cover has a free stop function that allows it to be stopped at the desired position.
• 

Intelligent Crosshead

• Prevents Jig ImpactsThe intelligent crosshead always recognizes its current position. If jigs get too close to each other due to an operational error, an impact warning is issued, and the crosshead is s topped automatically.Contact Detection and Instantaneous Emergency StopThe machine status is diligently monitored even when the crosshead is moved with the protection cover open, such as when adjusting the position of test jigs or attaching samples. If the machine detects test force changes due to contact with jigs or hands, the crosshead performs an emergency stop.Overload Detection FunctionIf the machine detects a test force exceeding the load cell capacity, the crosshead stops automatically. This reduces the risk of load cell damage from overloads during jog operation and during testing. (Note that the possibility of damage cannot be completely eliminated.)
• 
• Stroke Limit SwitchPress, Set the Position, ReleaseA stroke limit switch, which sets the limits of crosshead movement, prevents crosshead and jig impacts. A spring mechanism inside the switch fixes the position when it is released, thereby preventing incorrect settings due to operational errors, such as forgetting to fix it.
• 

Boost Productivity with Enhanced Usability Features

Operation Controller

• 
• User-Friendly InterfaceEquipped with a color liquid crystal touch panel that displays the most appropriate buttons and information in accordance with the situation. Various operations and information can be displayed, such as adjusting the distance between jigs before a test and checking measurement values during testing.Machine Self-Diagnosis FunctionSensor amplifier calibration information, testing machine operation status, power supply voltage, communication status, etc., are constantly monitored. There is immediate notification in the event of a fault. Also, it is equipped with a function that checks the number of hours of instrument usage and the number of times the instrument has been used. When a prescribed value is reached, the operator is notified. This is useful for scheduling maintenance and contributes to greater uptime.

Selectable Displays

An easy-to-see format can be selected for the measurement value display details during a test. If measurement values are displayed over two lines, the measurement values can be checked visually, even from a distance.

Automation of the Test Force Electrical Calibration Function

Test force electrical calibration, which must be performed when starting the test machine, is performed automatically.

Stand-Alone Testing Function

Testing can be performed with the operational controller only, without using a computer.
-Tensile, compression, and bending test conditions can be configured directly from the touch panel.
-The measurement results are saved on a USB flash drive.
Note: Prepare the USB flash drive separately.

• Voice Operation Is Supported  * Sound can be muted.Voice notification is played before crosshead operation, preventing operator errors.Operation Sound Can Be Selected in Accordance with the Environment  * Sound can be muted.Autograph-specific operation sounds have been designed. You can choose between “pleasant sound for comfortable operation” and “sound that is easy to hear in noisy conditions.”
• 

Multi-Table

Testing can be performed efficiently with minimal movement by using a multi-table where tools and samples used in testing can be placed.

Cutting-Edge Specifications for a New Era of Testing Quality

• High-Speed Data Sampling: 5 kHzThe high-speed sampling function has been enhanced from 1 ms to 0.2 ms. Rapid or minute changes can now be recorded.
• 

• Wide Range of Testing Speeds and High-Speed Crosshead ReturnThe test speed range is 0.0005 to 1500 mm/min, so tests can be performed under more test conditions. Also, the crosshead return speed has been increased to 1650 mm/min, which contributes to reducing customers’ test takt time.
• Test Force Accuracy Guaranteed Range: 1/1000The test force accuracy guaranteed range has been enlarged to 1/1000, which widens the data confidence interval. The test force rise portion also can be analyzed with confidence. Tests that required replacing multiple load cells depending on the test force can now be performed with fewer load cells, freeing the operator from the difficult replacement operation.

• Expandability to Enable Various MeasurementsBy adding an optional board, measurements can be made using the Shimadzu strain gauge type extensometer. Also, both analog and digital signals can be input, enabling various types of measurements.
• Optional Board

Environmentally and operator friendly state-of-the-art universal testing machine The operability and visibility of the computer-controlled hydraulic servo type universal testing machine (UH-X) and the high-performance universal testing machine (UH-FX), equipped with front opening type hydraulic grips, have been greatly improved by the adoption of a large color touch panel. Equipped with a semi autotuning function that automatically adjusts the control parameters, stress control and strain control (ISO 6892 compliant) can be easily carried out without the need for a preliminary test. The UH-Xh and UH-FXh models feature a new hybrid hydraulic oil source that reduces the required quantity of hydraulic oil, thereby achieving a major reduction in electrical power (about 50 %).

Control Performance and Ease-of-Operation

 

Semi-Auto-Tuning Function Enables High Precision Stress Control and Strain Control
(compliant with ISO 6892-2009 and JIS Z2241 metallic materials tensile testing standards)

Control parameters are auto-tuned in real time, based on test force and strain values measured during testing. This eliminates the need for preliminary testing and makes it easy to perform highly precise stress-controlled or strain-controlled testing. The semi-auto-tuning function also allows performing ISO 6892-2009 (precision strain-controlled testing)* and JIS Z2241 compliant metallic materials tensile testing.

* Requires TRAPEZIUMX.

Extra-Large Color LCD Touch-Screen Significantly Improves Ease-of-Operation and Visibility

The large 10.4-inch color touch-screen significantly improves visibility and ease-of-operation. This color graphical user interface enables performing a wide variety of functions with a simple touch of the screen. This makes it easy to operate the testing machine, even for first-time users.
It also displays S-S curves in real time during testing.

Rangeless Data Measurement

Test force and strain can be measured without having to specify an amplifier range. This means data can be acquired using optimal measurement parameters, even for specimens with unknown strength. In addition, since the analog indicator and output to the data recorder have a virtual range, evaluation is possible in the same manner as before.

Key Switch Included Standard

A key switch is provided standard to ensure security is properly controlled.

USB Memory Enables Performing Tests Without Connecting to a Computer*

By inserting a USB memory stick into the measurement controller with test parameters stored in the USB memory, tests can be performed without a computer. Furthermore, measurement data is automatically saved in the USB memory after tests, which enables analyzing the data with TRAPEZIUMX or using it to create reports.

* Requires TRAPEZIUMX.

Crosshead Elevating Switch Box (optional) Provides Finger-Tip Control

Using the crosshead elevating switch box allows positioning the crosshead without looking away from the testing space.

* Appearance and specifications are subject to change without notice.

 

Design Saves Energy and Hydraulic Oil

 

Hybrid Hydraulic Unit Reduces Power Consumption by 82 %
(with model UH-500kNXh)

A hybrid hydraulic unit combines an AC servo motor with a hydraulic pump so that the pump only operates when necessary. This provides an energy-efficient testing machine and reduces its environmental impact.

This product conforms with Shimadzu’s ECO labeled product.
Energy Saving: Power consumption reduced by 82%
as compared to a conventional Shimadzu product.
(with Shimadzu standard operating conditions)

Quieter Hydraulic Unit (for UH-FX only)

The sound level of the hydraulic unit for the grips was reduced by over 10 dB, from 75 dB to 65 dB, compared to the previous model.

Requires up to 50 % Less Hydraulic Oil

For model UH-F500kNXh, the amount of hydraulic oil required has been cut in half, from 80 to 40 liters.

* Appearance and specifications are subject to change without notice.

 

Reliability and Safety

 

Ultra-High-Speed Sampling Function Ensures No Sudden Variations in Strength Are Missed

By connecting to a computer installed with TRAPEZIUMX data processing software, data can be acquired at ultra-high sampling rates of up to 1 msec (1 kHz). This enables capturing any sudden changes in test force, such as at the break point of brittle materials, with high precision. Sampling parameters can be changed during tests, so that critical areas can be analyzed in more detail.

A Variety of Automatic Control Programs Included Standard

A tensile testing control program for metallic materials (JIS Z2241 and ISO 6892-2009) is included standard.

Standard programs include testing at a constant speed, as well as testing where the controlled parameter is increased at a constant rate, and then held at a certain value. The controlled parameters include stroke, test force, strain, and others.

Not only cycle test control, but also high-temperature tensile test control, stroke speed 3-step switching control, and even concrete test control are included standard.

Equipped with Easy-to-Operate Front-Opening Hydraulic Grips (for UH-FX only)

 

• The center hole hydraulic cylinder actuated front-opening hydraulic grips allow efficient specimen recovery and scale removal and provide superior safety. Testing long materials is easy as well.
• The grip face open/close switch is designed for safety. Grips are actuated only while the switch is depressed.

Easy to Replace Grip Faces (for UH-FX only)

Grip faces are light weight and can be exchanged easily by simply inserting them from the front.

Easy-to-Understand Specimen Grip Positioning Indicator Included (for UH-FX only)

The grip face positioning markings allow gripping specimens easily and accurately.

Compression Plates Installed/Removed Easily in a Single Step (for UH-FX only)

No wrenches or other tools are necessary.

Non-Rotating Threaded Columns Improve Safety
(not included on large-capacity models from 2000 to 4000 kN)

This allows mounting specimens with confidence.

Includes Grip Face Overhang Indicator Cover (for UH-FX only)

An indicator cover is installed at the maximum grip face overhang position, occurring when the grip faces are closed. This allows mounting specimens with confidence.

Grip Holder Includes Safety Stopper

A safety stopper prevents the left and right grip faces from contacting each other in the event of an operating error, which prevents damaging the grip faces.

Multi-Level Crosshead Positioning Structure (all models)

The upper crosshead position can be changed easily depending on the specimen length. Therefore, tests can be performed at a height appropriate for the operator.

Safety Cover Can be Included for Protection from Flying Specimen Debris
(optional for all models)

A protective safety cover can be included on the loading unit for protection from flying specimen debris. In addition, an interlocked switch can be included on the door, upon request.

* Appearance and specifications are subject to change without notice.

 

Measurement Controller (Operation Unit)

 

Easy-to-See Display for Both Digital and Analog Measurements

The analog indicator (option) is large, with a 450 mm diameter. The digital display is located within the same field of view to ensure even small changes in test force are not overlooked, such as at the yield point.

step 1

Main screen

From this initial screen, various settings can be specified or information displayed.

step 2

Set test parameters

This screen allows the easy entering of all necessary test parameters via a single screen. Enter the loading speed, specimen information, test mode, and other settings.

step 3

Set the break detection mode

Next, specify the method used for detecting the break point. In addition to the break sensitivity and break level functions available previously, a new break peak level function was added to make the system even easier to use.

step 4

Start the test

This completes the setup. Now press the start button. To prevent starting accidentally, a two-step interactive start process is used.

* Appearance and specifications are subject to change without notice.

 

The Touch-Screen Enables Intuitive Operation

 

Large Character Display

The large-sized test force/stroke data display can be easily read. The display can be switched to the stress value display mode or displacement value display mode with a touch of a button.

S-S Curve Display

During a test, an S-S curve is displayed in real time.

Testing Machine Operating Status
/Test Parameters Display

Since the testing machine’s operating status and test parameters can be checked at a glance, an erroneous setting or operation can be prevented.

Combining all necessary functions in a compact design, this high-performance, cost-efficient testing machine has been developed for low-capacity strength evaluations. Increase testing efficiency using dedicated data processing software (TRAPEZIUM LITE X).

Convincing Cost Performance

New AGS-X Provides Practical, Affordable Testing Solutions

Easy Control of Stress and Strain

Offers real-time auto tuning of control parameters, based on measured test force and strain data. Safely make comparisons to unknown sample data without the need for preliminary tests.
In addition, the AUTOTUNING FUNCTION easily performs strain control, an ISO6892-2009 requirement.

Achieve an Accurate S-S Curve with High-Precision Load Cells

The wide, guaranteed load cell precision range of 1/500 to 1/1 improves testing efficiency and ensures that virtually all of your testing can be performed without switching the load cell or jig. Furthermore, high-speed sampling of 1msec ensures no missed strength changes.

Smarter Work Space

New and enhanced functions support easier, more efficient testing

Common Joint for Both Tensile and Compression Tests (20-300kN frame)

Adopts a single joint for both tension and compression tests. This makes it easier to exchange jigs. In addition, the joint is set with a nut placed in the upper part of the loading cell, which allows for safe detachment of the joint on the table.

Easy Control of Stress and Strain

Conduct testing by calling up test methods from TRAPEZIUM LITE X software. The AGS-X can be used as a standalone tester to test specimens using test methods created with the tester itself.

Jog Controller (Option for 10kN frame)

This allows hand-held control of the crosshead position. The jog dial makes fine positioning a breeze.

Main Operation Panel

The main operation panel enables the development and storing of test conditions, allowing testing without having to connect to a PC. Perform various operations with the jog wheel, such as opening and shutting the button for automatic grips or the automatic extensometer. The main operational panel is movable, allowing convenient adjustment of the angle.

Multipurpose Tray (Desk-top frame)

Large space in front of the instrument. Perfect for placing jigs, arranging specimens, or taking notes.

Easy Control of Stress and Strain

Conduct testing by calling up test methods from TRAPEZIUM LITE X software. The AGS-X can be used as a standalone tester to test specimens using test methods created with the tester itself.

Jog Controller (Option for 10kN frame)

This allows hand-held control of the crosshead position. The jog dial makes fine positioning a breeze.

Main Operation Panel

The main operation panel enables the development and storing of test conditions, allowing testing without having to connect to a PC. Perform various operations with the jog wheel, such as opening and shutting the button for automatic grips or the automatic extensometer. The main operational panel is movable, allowing convenient adjustment of the angle.

Multipurpose Tray (Desk-top frame)

Large space in front of the instrument. Perfect for placing jigs, arranging specimens, or taking notes.

Improved Safety

Comprehensive Safety Measures

SAFETY FUNCTION / ONE-TOUCH STROKE LIMIT

The safety function stops the testing machine if force changes exceed a certain level during specimen setting or return. In addition, setting stroke limiters is easy with one touch of the switch.

SAFETY COVER

Controls scattering of the test specimen during testing. The interlock improves safety: operators can open and close it easily with the slide mechanism.

DUAL EMERGENCY-STOP SWITCHES

Features emergency-stop switches on both sides (20kN-300kN frame).

Quest for Convenience

Cutting-Edge Software Meets Your Materials Development and Quality Control Needs

Improves Productivity and Efficiency of Q

Features

• Needle indicator ideal for taking photographs after testing
• Everything from configuring the test conditions to implementhing the tests can be performed easily with a large touch-panel screen.
• Highly rigid loading unit to accommodate ultra-high strength concrete

CONCRETO 2000X

CONCRETO 3000X

CCH-X Series

CCM-X Series

Micro Displacement and Test Forces Controlled and Measured to High Precision
In recent years, devices and components have become increasingly downsized and are being mounted at higher densities due to the trend towards thinner, lighter and smaller electronic devices equipment. Accompanying this, in the field of strength evaluation testing, there has been an increasing need for testing machines that can control and measure displacement and test forces on micro samples in the several µm or several mN micro regions and that can evaluate strength to high precision. The Shimadzu Micro Autograph MST-I has been developed and put onto the market in response to this need for a micro strength evaluation testing machine primarily in the electronic components sector.

[Features]

[Specifications]

[Evaluation Examples]

Solder bonding force evaluation of chip components, Bonding strength evaluation of solder balls, Bonding strength evaluation/tensile strength evaluation of bonding wire, Insertion force measurement of contact pins, Properties evaluation of metal foil, Single fiber tensile strength evaluation