XDimensus 300 — Dimensional X-Ray CT System

Bara Scientific — Sat, 11 Jul 2020 04:57:13 +0000

A “New Dimension” in Measurement The XDimensus 300 is a dimensional X-ray CT system capable of measuring the 3D internal and external geometry of sample interiors. It features a large-scale, high-resolution flat panel detector, which provides a wide field of view at excellent resolution, Shimadzu’s proprietary new X-ray generator, with approximately three times the X-ray generating effciency of our previous models, and new software, which provides excellent operability. It also features an air conditioning unit to maintain a consistent temperature inside the instrument, a frame that provides high geometric stability, and an ultra-high-accuracy sample positioning stage. As a result, it provides a level of dimensional measurement accuracy impossible with conventional observation X-ray CT systems. Shimadzu is offering this new, unprecedented system for dimensional measurements, including the interior and exterior of industrial goods such as plastic molded parts and aluminum die cast parts.

Large Measurement Volume in Compact Cabinet

ø300mm × H210mm
Cabinet size
W: 2,195 mm × D: 1,561 mm × H: 1,971 mm

With its compact housing, 2.2 m wide and 1.6 m deep, it can be installed in an area a mere 3.5 m long and 4 m wide.
Although the housing is small, it provides measurements of samples 300 mm in diameter.

Quick and Easy Operation

No calibration process is necessary before scanning. Corrections are performed in real time during data collection, so scanning can start immediately after sample placement. With its new user interface, the operator can start scanning without complicated parameter settings.

1. Sample Placement

Load the sample of interest onto the stage. Samples up to 300 mm in diameter can be loaded and observed.

2. Set the Scan Field of View and Parameters

Determine the positioning and field of view using a software wizard.

3. CT Scan and Reconstruction

Just select the scan parameters, and click [Start] to start the CT scan. Calibration is not required.

4. 3D Measurement

Various measurements are performed with 3D data obtained using the 3D image processing software.

Dimensional X-ray CT – Product