This is a small, light-weight, portable air suction pump (air pump) equipped with functionality for constant flowrates and measuring accumulated flowrates. Moreover, the MP-Σ100HNII provides the highest suction pressure among Sibata MP-ΣN series minipumps so that it can sample at a stable suction flowrate with respect to hazardous gas sorbents, etc. with high pressure loss. As its suction pressure is high and suction flowrate is stable, it can be widely used for sampling hazardous substances with high pressure loss in work environments, indoor environments, air environments, etc.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate changes associated with suction pressure changes.
● The instantaneous flowrate and accumulated flowrate are displayed as values converted to 25 ℃ at 1 atm (at the time of shipment).
• A quick charger (QC-10N) is not included.

This is a small, light-weight, portable air suction pump (air pump) equipped with functionality for constant flowrates and measuring accumulated flowrates. Moreover, the MP-Σ100HNII provides the highest suction pressure among Sibata MP-ΣN series minipumps so that it can sample at a stable suction flowrate with respect to hazardous gas sorbents, etc. with high pressure loss. As its suction pressure is high and suction flowrate is stable, it can be widely used for sampling hazardous substances with high pressure loss in work environments, indoor environments, air environments, etc.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate changes associated with suction pressure changes.
● The instantaneous flowrate and accumulated flowrate are displayed as values converted to 25 ℃ at 1 atm (at the time of shipment).
• A quick charger (QC-10N) is included.

MP-Σ (sigma) series products are small, light-weight, portable high-performance air suction pumps (air pump) equipped with the accumulated flowrate measurement function. As basic types, three types for 0.5 L/min, 3 L/min, and 5 L/min are available by flowrate range. As their suction flowrate is stable, they can be widely used for sampling hazardous substances in work environments, indoor environments, air environments, etc.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate drops associated with suction pressure increases, such as when collecting dust.
● Timer sampling can be performed in four modes (manual, countdown timer, volume timer, and cycle timer).
● The LC display has a backlight so you can check the displayed content such as flowrate even in a dark place.
● The level of backup filter contamination can be checked visually.
● It is equipped with a measurement data recording function and ten past measurement results can be checked on the main minipump unit as well as the computer.
• A quick charger (QC-10N) is not included.

MP-Σ (sigma) series products are small, light-weight, portable high-performance air suction pumps (air pump) equipped with the accumulated flowrate measurement function. As basic types, three types for 0.5 L/min, 3 L/min, and 5 L/min are available by flowrate range. As their suction flowrate is stable, they can be widely used for sampling hazardous substances in work environments, indoor environments, air environments, etc.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate drops associated with suction pressure increases, such as when collecting dust.
● Timer sampling can be performed in four modes (manual, countdown timer, volume timer, and cycle timer).
● The LC display has a backlight so you can check the displayed content such as flowrate even in a dark place.
● The level of backup filter contamination can be checked visually.
● It is equipped with a measurement data recording function and ten past measurement results can be checked on the main minipump unit as well as the computer.
• A quick charger (QC-10N) is not included.

MP-Σ (sigma) series products are small, light-weight, portable high-performance air suction pumps (air pump) equipped with the accumulated flowrate measurement function. As basic types, three types for 0.5 L/min, 3 L/min, and 5 L/min are available by flowrate range. As their suction flowrate is stable, they can be widely used for sampling hazardous substances in work environments, indoor environments, air environments, etc.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate drops associated with suction pressure increases, such as when collecting dust.
● Timer sampling can be performed in four modes (manual, countdown timer, volume timer, and cycle timer).
● The LC display has a backlight so you can check the displayed content such as flowrate even in a dark place.
● The level of backup filter contamination can be checked visually.
● It is equipped with a measurement data recording function and ten past measurement results can be checked on the main minipump unit as well as the computer.
• A quick charger (QC-10N) is not included.

The MP-W5P minipump is a small, light-weight, portable air sampling suction pump (air pump) equipped with functionality for measuring accumulated flowrates. It can be used across a wide range of flowrates between 0.050 and 5.00 L/min.
Constant flowrate functionality is included to inhibit suction flowrate drops associated with suction pressure increases, such as when collecting dust. As its flowrate range is wide and stable, it can be widely used as an air sampling pump for hazardous substances in work environments, indoor environments, and air environments. Also, the MP-W5P is CE marked.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate changes associated with suction pressure changes.
● You can select the display mode for the instantaneous flowrate and accumulated flowrate from the value converted based on temperature and atmospheric pressure (25 ℃ at 1 atm; 20 ℃ at 1 atm; 0 ℃ at 1 atm), or the actually measured flowrate.
● The flowrate range of this minipump is as wide as 0.050 to 5.00 L/min.
● It is as small as W95 × D56 × H95 so is convenient to carry around.
(This is the smallest among Sibata’s pumps that can pump at a flowrate larger than 3 L/min.)
● The product is CE marked.

The MP-W5P minipump is a small, light-weight, portable air sampling suction pump (air pump) equipped with functionality for measuring accumulated flowrates. It can be used across a wide range of flowrates between 0.050 and 5.00 L/min.
Constant flowrate functionality is included to inhibit suction flowrate drops associated with suction pressure increases, such as when collecting dust. As its flowrate range is wide and stable, it can be widely used as an air sampling pump for hazardous substances in work environments, indoor environments, and air environments. Also, the MP-W5P is CE marked.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate changes associated with suction pressure changes.
● You can select the display mode for the instantaneous flowrate and accumulated flowrate from the value converted based on temperature and atmospheric pressure (25 ℃ at 1 atm; 20 ℃ at 1 atm; 0 ℃ at 1 atm), or the actually measured flowrate.
● The flowrate range of this minipump is as wide as 0.050 to 5.00 L/min.
● It is as small as W95 × D56 × H95 so is convenient to carry around.
(This is the smallest among Sibata’s pumps that can pump at a flowrate larger than 3 L/min.)
● The product is CE marked.

The MP-W5P minipump is a small, light-weight, portable air sampling suction pump (air pump) equipped with functionality for measuring accumulated flowrates. It can be used across a wide range of flowrates between 0.050 and 5.00 L/min.
Constant flowrate functionality is included to inhibit suction flowrate drops associated with suction pressure increases, such as when collecting dust. As its flowrate range is wide and stable, it can be widely used as an air sampling pump for hazardous substances in work environments, indoor environments, and air environments. Also, the MP-W5P is CE marked.

● The product is equipped with a flow sensor so it can directly measure the suction flowrate and digitally display the instantaneous flowrate and accumulated flowrate.
● Constant flowrate functionality is included to inhibit suction flowrate changes associated with suction pressure changes.
● You can select the display mode for the instantaneous flowrate and accumulated flowrate from the value converted based on temperature and atmospheric pressure (25 ℃ at 1 atm; 20 ℃ at 1 atm; 0 ℃ at 1 atm), or the actually measured flowrate.
● The flowrate range of this minipump is as wide as 0.050 to 5.00 L/min.
● It is as small as W95 × D56 × H95 so is convenient to carry around.
(This is the smallest among Sibata’s pumps that can pump at a flowrate larger than 3 L/min.)
● The product is CE marked.